BAIC — Industrial Applications

196 Chapter 15 unique applications where battery electric rails make the most sense such as in mining applications, underground tunnels, and in urban public transportation. One final thought on the electrification of commercial transit vehicles. While safety is impor- tant in every lithium-ion battery application, in those such as a public bus which will carry many people at once, safety is absolutely vital. In this instance, a failure must be able to be contained outside of the passenger compartment. Even better in this case would be a battery pack design that can isolate a failure to a single cell.

HD Truck Applications Over the road and heavy-duty trucking is also experiencing increased demand for electrifica- tion. With new regulations being enacted annually that limit engine idling, there is greater need for increased amounts of electrification to provide housing loads, increase fuel economy, reduce fuel demand for trailer cooling, and similar applications. In fact, many US states have already enacted “anti-idling” regulations that do not permit semitrucks and other large trucks (Gross Vehicle Weight Ratio (GVWR) 10,000 lbs or heavier) to sit idling for longer than 5 min (California Air Resource Board, 2013).

This means that these trucks can no longer use engine power to run their “housing” loads to power their environmental control (heating and cooling) and other auxiliary power devices (computers, TVs, etc.) while the truck is at rest. Many of these vehicles are now choosing to install battery power to run these devices while the truck sits overnight or for long periods. Some of these applications are relatively small, less than 5 kWh and must be very light and compact. The “best” battery in this instance would be one that can work both as a high-power starting load for the engine as well as an energy source to operate the housing loads.

This may be accomplished through a battery system that includes both lithium-ion and another power source such as lead acid or an ultracapacitor, or in some cases even with advanced lead acid solutions. But by using a combined “hybrid” battery the lithium-ion can supply the energy needs of the system, while the lead acid or ultracapacitor provides the power needs for starting the engine. Other HD truck applications are looking to use battery power to maintain the temperatures of their refrigerated trailers as well. Similarly, these trucks have historically used small diesel engines to run the refrigeration units of their trailers.

Today they are working to install battery power of about 40 kWh to 50 kWh in order to maintain the cold temperatures needed to haul frozen products. Industrial Applications Batteries and energy storage also provide power for a wide range of industrial applications. If you go into many large warehouses, you will see that the forklifts and other equipment used