BAIC — Future Trends in Battery Technology

214 Chapter 16 Future Trends in Battery Technology So what could happen to the battery that could make lithium-ion truly disruptive? Battery chemistry will undoubtedly continue to evolve, but will it ever become truly disruptive? That is difficult to say, lithium is already one of the lightest materials in the periodic table so there is not a lot of opportunity to continue to something outside of a lithium-based technology. So perhaps the disruption will not come by the lithium, but from the other materials. There are essentially three different parts of the traditional lithium-ion battery that are continuing to be improved: the anode, the cathode, and the electrolytes.

By working with these three components, researchers are working to drive up the usable operating voltage of lithium-ion cells, drive up the energy density, and improve the safety and life of the cells. First we will look at the anodes: silicon and tin anode materials have been receiving significant attention over the past few years. This is because of the potential that they offer for increasing energy density. While the theoretical energy density improvement that can be gained using silicon or tin anodes is in the range of 300% or more, the practical energy density increase is often about one-third of the theoretical number.

This will begin to bring lithium-ion into the range of competitiveness with liquid fuels. However, both of these materials also suffer from short life cycle due to the large amount of expansion that they experience during regular charge and discharge cycling which is also in the range of 300%. But that does not mean that we should count it out. There is a lot of work occurring such as looking at nano-materials, coating the silicon or tin with graphite, graphene or other materi- als, as well as new methods for manufacturing that may offer major improvements in the ability of these chemistries to become mass market capable.

We are already beginning to see some of these chemistries emerging in the portable power industry, as we see personal electronics getting smaller and thinner and perhaps even wearable. These applications tend to have much shorter life requirements than transportation or stationary energy storage applications and so become a good ground for the development and testing of these solutions. So as this anode technology continues to evolve, it will eventually replace some if not much of the current graphite-based anode materials. Cathode materials also continue to see some evolutionary improvements.

Some of these come from combining or blending different chemistries in order to get the best parts of both. But there is less opportunity here for making great strides based on current chemistries. Electrolytes and separators will also continue to see evolutionary changes. Electrolytes are the key to increasing the operating voltages of the lithium-ion cells and continue to be experi- mented with by adding different additives into the base electrolytes. There is also much work investigating the use of organic electrolytes. Organic electrolytes may end up being safer than the current technologies. Separators are also getting some attention, but this is mostly focused