The Future of Lithium-Ion Batteries and Electrification 215 on improving the safety of the cells. Many cell manufacturers are now moving toward the use of a ceramic coated separator as it proves to be less sensitive to penetration testing and can continue to operate effectively at much higher temperatures than traditional polypropylene/ polyethylene separators (Nishi, 2014). So what other types of improvements can we look at which may hold some truly transformational opportunities for lithium-ion batteries? Perhaps one of the most interesting new technologies that is in development is the solid state battery. A solid state battery is one that simply does not use a liquid electrolyte.
Instead the cathode material is built up on a substrate using a deposition method. The separator material is then built upon that again using a deposition methodology. The real benefit of solid state batteries is the improvement in energy density that is achieved by directly depositing one material onto another compared to the traditional lithium-ion which ends up with spaces between the cathode, separator, and anode. And with no liquid electrolyte the safety of the solid state battery is greatly improved. To date most of the solid state lithium-ion batteries have been very small, in the mAh size range.
But if developers are able to successfully scale up these cells they may become much more competitive for use in larger applications (Mizuno, Yada, & Iba, 2014). Another battery technology that is also receiving a lot of research attention today is the lithium-air battery. The lithium-air battery uses a lithium-based anode with a solid electrolyte layer that is “electromechanically coupled” to the oxygen in the air. This offers extremely high energy density, very flat discharge curves, essentially unlimited shelf life as long as it is not exposed to air, low cost, and no environmental issues.
However, there are some challenges with it also, the biggest of which is that it is dependent on the environment for the oxygen and it has limited power output capacity (Atwater & Dobley, 2011). Another technology that has been receiving significant development over the past twenty years or so and should be watched is the fuel cell. Micro fuel cells, automotive fuel cells, and very large fuel cells have all been deployed into the market. These technologies may come to displace some of the lithium-ion battery market if several things come to pass, including the development of a fueling infrastructure and continued cost reduction.
The fuel cell is essentially an electricity generator that may begin to grow in many of the same markets that lithium-ion batteries are being introduced into. Another set of technologies that is growing are the supercapacitors and ultracapacitors. These technologies have historically only been adequate for extremely short duration bursts of very high power. However, current research is working to increase the energy density of these technologies, thereby making them much more competitive with traditional batteries.
Additionally, as their manufacturing process is very similar to lithium-ion battery manufacturing, we may begin to see cell manufacturers adding these technologies to their product portfolios.