daewoo — Daewoo D1146 D1146TI DE08TIS Diesel Engine Maintenance Manual

D1146/D1146TI/DE08TIS MAINTENANCE MANUAL Note : gauge 180 ° and re-insert for check. If you have a problem getting a good oil level reading on dipstick, rotate the level b) Watch the oil pressure warning lamp. If the lamp blinks, it may be the oil pick-up screen is not covered with oil. Check oil level gauge. Add oil to the oil pan, if required. Do not overfill. If level is correct and the status still exists, see your DEALER for possible switch or oil pump and line malfunction. Note : Oil pressure will rise as RPM increases, and fall as RPM decreases. In addition, cold oil will generally show higher oil pressure for any specific RPM than hot oil.

Both of these conditions reflect normal engine operation. c) Watch the engine water temperature gauge and be sure there is proper water circulation. The water temperature gauge needle will fluctuate if water level in expansion tank is too low. At the end of the break-in period, remove break-in oil and replace the oil filter. Fill oil pan with recommended engine oil. Refer to following table. * If long oil change intervals are to be used, ACEA-E3 oil must be used. 98 Printed in Jan. 2001 PS-MMA0415-E1A Engine oil capacity Recommend oil Model Max. line(lit) Min line (lit) Total (lit) API No.

D1146 Bus 15.5 12 17.5 API CD grade or above CE grade D1146TI Truck 15.5 12 17.5 Truck 20 17 22 DE08TIS Bus 15.5 12 17.5 ACEA-E2 or ACEA-E3 (API CH-4) Truck 20 17 22