daewoo — Daewoo D1146 D1146TI DE08TIS Diesel Engine Maintenance Manual

D1146/D1146TI/DE08TIS MAINTENANCE MANUAL 4) Reassembly Reassembly operation is performed in reverse order of disassembly. All the gaskets must be replaced with new ones at reassembly. 5) Testing (1) Suction capacity test Connect one end of a hose to the inlet side of the feed pump and immerse the other end of it into the fuel tank as illustrated. Hold the feed pump in position about 1 m above the level of fuel in the fuel tank. Operate the tappet at the rate of 100 rpm and check to see if fuel is drawn in and delivered for 40 seconds or so. (2) Delivery test Make a test with the feed pump mounted on a pump tester as illustrated.

Operate the pump at the rate of 1,000 rpm and check to see if the pump delivery is more than 405 cc/15 seconds. (3) Sealing test Plug up the delivery port on the feed pump and apply compressed air of 2 kg/cm 2 into the inlet side. Submerge the feed pump in a container of diesel fuel and check for air leak. 117 Printed in Jan. 2001 PS-MMA0415-E1A