daewoo — Daewoo D1146 D1146TI DE08TIS Diesel Engine Maintenance Manual

D1146/D1146TI/DE08TIS MAINTENANCE MANUAL Inspect the cam face for scratch or damage. Slight step wear or damage on the cam face may be corrected with oil stone or oiled grinding paper. But, replace if severely damaged. (3) Cam shaft z Clearance between camshaft journal and camshaft bush - With an outside micrometer, measure the camshaft journal diameter. - Measure the inside diameter of the camshaft bushing on the cylinder block using a cylinder bore indicator, and compare the measured value with the camshaft outside diameter to determine the clearance. M1090 Replace the bushing if the measured value is beyond the specified limit.

z Run-out Support the camshaft on two V blocks and check for run-out using a dial indicator. Correct or replace the cam shaft if the amount of run-out is beyond the value indicating need for servicing. 58 Printed in Jan. 2001 PS-MMA0415-E1A Standard Limit 0.12 ∼ 0.17 mm 0.24 mm Standard Limit