daewoo — Daewoo D1146 D1146TI DE08TIS Diesel Engine Maintenance Manual

D1146/D1146TI/DE08TIS MAINTENANCE MANUAL z In case that pin's wear is more than the limit value, grind the crankshaft journal and crank pin, and use the undersized bearings. Be sure to use grinding paper which has been immersed in oil. ‹ Standard ‹ 0.25 (Inside diameter is 0.25 mm "R" part's specified value ① Crank pin's "R" : 4.5 0 2.0 lesser than the standard size.) ‹ 0.50 (Inside diameter is 0.50 mm lesser than the standard size.) ② Crank Journal "R" :

4 0 2.0 ‹ 0.75 (Inside diameter is 0.75 mm lesser than the standard size.) ‹ 1.00 (Inside diameter is 1.00 mm lesser than the standard size.) Undersize bearings are available in 4 different sizes as indicated above, and the crankshaft can be reused through the regrinding as described above. CAUTION : In case of regrinding, the grinding the "R" part of bearing end should be correctly done and keep in mind to remove any jaws or coarse surface absolutely. 3) Crankshaft run-out z Support the crankshaft on V blocks. z Turn the crankshaft with a dial indicator placed on the surface plate and take the amount of crankshaft run-out. 60 Printed in Jan. 2001 PS-MMA0415-E1A Standard Limit 0.05 mm 0.1 mm