D1146/D1146TI/DE08TIS MAINTENANCE MANUAL (2) Crankshaft bearing and connecting rod 1) Visual check Visually check the crankshaft bearing and connecting rod bearing for scores, uneven wear or damage. 2) Oil clearance between crankshaft and bearing (Method 1 : dial gauge) z Main bearing clearance Install the main bearing in the cylinder block, tighten the bearing cap to specified torque, then measure the inside diameter. M1116 Compare the two values obtained through measurement of main bearing inside diameter with the outside diameters of crankshaft journals to determine the oil clearance.
z Connecting rod bearing clearance Install the connecting rod bearing in the connecting rod bearing cap, tighten the connecting rod cap bolts to the specified torque, then measure the inside diameter. 61 Printed in Jan. 2001 PS-MMA0415-E1A Torque 30 kg.m Standard Limit 0.052 ∼ 0.122 mm 0.25 mm Torque 18 kg.m