D1146/D1146TI/DE08TIS MAINTENANCE MANUAL z The clearance is computed by subtracting the piston outside diameter from the cylinder liner inside diameter. Replace either piston or cylinder liner, whichever damaged more, if the clearance is beyond the specified limit. Clearance between piston and liner (3) Piston rings 1) Visual check Replace the piston rings with new ones if detected worn or broken when the engine is overhauled. 2) Piston ring gap z Insert the piston ring into the upper portion of the cylinder liner bore so that it is held at a right angle to the cylinder liner wall. z Measure the piston ring gap with a feeler gauge.
feeler gauge z Replace piston rings with new ones if M1104 the gap is beyond the limit 65 Printed in Jan. 2001 PS-MMA0415-E1A Standard Limit φ111 ∼ φ111.022 mm φ111.122 mm Standard 0.103 ∼ 0.139 mm Standard Limit Top ring 0.40 ∼ 0.60 mm 1.5 mm 2nd ring 0.40 ∼ 0.60 mm 1.5 mm Oil ring 0.30 ∼ 0.50 mm 1.5 mm