daewoo — Daewoo D1146 D1146TI DE08TIS Diesel Engine Maintenance Manual

D1146/D1146TI/DE08TIS MAINTENANCE MANUAL 5) Crank shaft end play z Assemble the crankshaft to the cylinder block. z With a dial gauge, measure crankshaft end play. 3.2.6. Piston assembly (1) Disassemby of piston assembly Disassemble piston according to the disassembly process. (2) Piston inspection 1) Visual check Visually check the pistons for cracks, scuff or wear, paying particular attention to the ring groove. 2) Clearance between the piston and cylinder liner z With an outside micrometer, measure the piston outside diameter at a point 13mm away from the lower end of piston skirt in a direction at a Position of measuring outside diameter right angle to the piston pin hole.

13 mm G1095 z Using a cylinder bore gauge, measure cylinder liner inside diameter at 3 points (cylinder top ring contacting face, middle, and oil ring contacting face on BDC) in a direction at an angle of 45 ° . Take the mean value with the largest and smallest values excepted. 64 Printed in Jan. 2001 PS-MMA0415-E1A Standard Limit 0.15 ∼ 0.325 mm 0.5 mm Standard φ110.883 ∼ φ110.897 mm