D1146/D1146TI/DE08TIS MAINTENANCE MANUAL 4) Bearing spread and crush z Inspection Check to see that the bearing requires a considerable amount of finger pressure at reassembly operation. M1112 Spread z Crankshaft bearing crush Install the bearing and cap in the cylinder block, retighten the bolts to specified torque, unscrew out one bolt completely, then measure the clearance between the bearing cap and cylinder block using a feeler gauge.
z Connecting rod bearing crush Install the bearing and cap in the connecting rod big end, retighten the bolts to specified torque, unscrew out one bolt completely, then measure the clearance between the bearing cap and connecting rod big end using a feeler gauge. 63 Printed in Jan. 2001 PS-MMA0415-E1A Standard 0.19 ∼ 0.22 mm Standard 0.3 ∼ 0.5 mm