D1146/D1146TI/DE08TIS MAINTENANCE MANUAL 3) Wear z Assemble the connecting rod to the crankshaft and measure connecting rod big end side clearance using a feeler gauge. z Assemble the connecting rod to the piston and measure connecting rod small end side clearance. z If the measured values are beyond the limit, replace the connecting rod. 3.2.7. Fuel injection nozzle projection (DE08TIS) z z 68 Printed in Jan. 2001 PS-MMA0415-E1A Limit 0.5 mm nsert a seal ring on the cylinder nd assemble the injection nozzle Measure the clearance between ylinder head bottom and nozzle t he measured values are beyond mit, replace the seal ring. head the ip.
If the rd Fuel injection nozzle Cylinder head Torque 7kg.m A B Standa rd A (Thickness of seal ring) 3.5±0.1 mm B (Projection of nozzle) 2.43~2.80 mm