daewoo — Daewoo D1146 D1146TI DE08TIS Diesel Engine Maintenance Manual

D1146/D1146TI/DE08TIS MAINTENANCE MANUAL 3.3.4. Tappet and cam shaft z Undercool a new bush with dry ice for about 2 hours and press it into position in the cylinder block using a bench press. After the pressing operation, measure the inside diameter of the cam bush to check if it is not deformed. z Apply engine oil to the entire face tappets and slide them into the tappet holes on of the the cylinder block. z Wet the cam bush inside diameter camshaft with oil, and carefully assemble them and while turning the camshaft. CAUTION : Be careful not to generate a damage to camshaft and bush. z Check to see that the camshaft rotates smoothly. 70 Printed in Jan. 2001 PS-MMA0415-E1A