daewoo — Daewoo D1146 D1146TI DE08TIS Diesel Engine Maintenance Manual

D1146/D1146TI/DE08TIS MAINTENANCE MANUAL 3.3.5. Crankshaft z Install the main bearing (refer to assemble sequence : right figure) machined with two holes in the cylinder block so that the key is aligned with the key groove, then apply oil to the bearing surface. z Heat the crankshaft gear for at least 10 minutes to 120 ° C, then apply sealant (Loctite # 641) to the inside wall of the heated crankshaft gear evenly before inserting it to the end of crankshaft. G1051 z Semi-tighten a bolt at both sides of the crankshaft, apply engine oil to journals and pins, then assemble the crankshaft with the cylinder block by tightening the fixing bolts. CAUTION :

Coat engine oil to the pin and journal of crankshaft. z Install the oiled thrust washers with the oil groove facing outward. 71 Printed in Jan. 2001 PS-MMA0415-E1A