D1146/D1146TI/DE08TIS MAINTENANCE MANUAL z Turn the coupling until the notch mark of the indicator plate attached to the fuel injection pump is aligned with the notch mark of the coupling. z Tighten the coupling fixing bolts and nuts to specified torque. z Install the oil delivery pipe and return pipe. 3.3.17. Oil pump and oil pipe z Install a dowel pin in the No.7 bearing cap, then assemble the oil pump by tapping lightly with urethane hammer. z Tighten the assembling bolts with specified torque. z Assemble the oil suction pipe with the delivery pipe to oil pump by the bolts. 3.3.18. Timing gear case cover z Install dowel pin on the timing gear case.
z Mount a gasket by aligning the fixing z Align the dowel pin with the cover pin bolt holes with those on the gasket. hole, then install the cover with light tap. z Tighten the fixing bolts beginning with 83 Printed in Jan. 2001 PS-MMA0415-E1A Torque 6.0 ∼ 6.5 kg.m Torque 4.4 kg.m