daewoo — Daewoo D1146 D1146TI DE08TIS Diesel Engine Maintenance Manual

D1146/D1146TI/DE08TIS MAINTENANCE MANUAL z Operating the priming pump of supply pump, turn the crankshaft slowly in the direction of engine rotation until the fuel will drop at the rate of a drop for 6 8 sec. z Confirm then whether the indication point at the flywheel housing inspection hole and the engraved specified injection angle are coincided or not, and if the injection timing is not correct, adjust as follows. (1) As above adjusting method, Please coincide the indication point( ) at the flywheel housing's inspection hole with the flywheel's inspection angle. (2) Loosen the drive gear fixing bolt of injection pump a bit.

(3) After turning slowly the coupling of injection pump until the fuel will drop from #1 plunger at the rate of a drop for 6 8 sec., tighten the driving gear fixing bolt of fuel pump. z After the adjustment of injection timing, disassemble the "U" shape pipe, the delivery valve and the valve spring. 82 Notch mark Model Timing angle D1146 BTDC 15° D1146TI BTDC 9° DE08TIS BTDC 3° Printed in Jan. 2001 PS-MMA0415-E 1A