daewoo — Daewoo D1146 D1146TI DE08TIS Diesel Engine Maintenance Manual

D1146/D1146TI/DE08TIS MAINTENANCE MANUAL fixing bolts in the direction of fuel injection pump. 3.3.16. Fuel injection pump z Install the injection pump bracket in the cylinder block. z After measuring the amount of run-out with an alignment setting jig, disassemble the bracket, adjust the shims, then reassemble it. z Mount the top/bottom adjusting shims in the bracket and then mount the fuel injection pump. z Tighten the fixing bolts in a diagonal sequence to specified torque. Run-out 0.2 mm or less Torque 4.4 kg.m z Bring the piston of #1 cylinder to the compression TDC (OT) by turning the crankshaft. Again, turn 60° in the reverse direction of engine rotation.

z Disassemble the fuel injection pipe that connect the fuel injection pump and #1 injection nozzle. z Disassemble the fuel injection pump delivery valve holder, and after removing the valve and valve spring, again assemble the valve holder and then, on it assemble the pipe of "U" shape on it. 81 to the ing the in the on. ipe that and #1 pump after spring, Timing check hole Injection timing Flywheel notch mark ring gear (Fly wheel) njection timing notch mark (Fly wheel) I Printed in Jan. 2 Printed in Jan. 2 Printed in Jan. 2 001 PS-MMA0415-E1 A