daewoo — Daewoo D1146 D1146TI DE08TIS Diesel Engine Maintenance Manual

D1146/D1146TI/DE08TIS MAINTENANCE MANUAL z Idler gear pin with oil hole is assembled toward cylinder block. z Install the idle gear by coinciding the Mark “2” marks impressed on the crank gear, cam gear, fuel injection pump drive gear, and idle gear. z Install a thrust washer on the idle gear and tighten to specified torque. Mark “1” Mark “o” G1054 z Check and adjust the amount of backlash between gears using a feeler gauge. 3.3.15. Injection pump flange z After assembling the fuel injection pump gear to the idle gear, tighten the assembling bolts of the injection pump flange. z Mount gasket by aligning the bolt holes with the pin holes on the bearing housing.

G1097 z Turning the flywheel, adjust the pointer to the position of the engraved scale. z After adjusting the injection timing of fuel injection pump drive gear, tighten the 80 Printed in Jan. 2001 PS-MMA0415-E1A Torque 3.1 kg.m Measuring position (between) Backlash Limit cam gear & idle gear 0.16 ∼ 0.28 mm 0.35 mm crank gear & idle gear 0.16 ∼ 0.28 mm 0.35 mm injection pump & idle gear 0.16 ∼ 0.28 mm 0.35 mm