D1146/D1146TI/DE08TIS MAINTENANCE MANUAL valve guide. z After installing valve springs and spring G1102 retainer, press the retainer with a jig, then install the cotter pin. z Tap the valve stem lightly with a rubber hammer to check that the valve is assembled correctly. Compress the spring 3.3.27. Cylinder head z Blow the bolt holes of cylinder block with a compressed air and remove the foreign matter. z Clean the head gasket contact surface thoroughly. CAUTION : However, be careful for the foreign material not to enter into the combustion chamber. z Assemble the new head gasket by aligning the holes with dowel pins of cylinder block with “ TOP” mark facing upward.
TOP G1103 87 Printed in Jan. 2001 PS-MMA0415-E1A