daewoo — Daewoo D1146 D1146TI DE08TIS Diesel Engine Maintenance Manual

D1146/D1146TI/DE08TIS MAINTENANCE MANUAL z Check the inside of combustion chamber for foreign substances, and carefully mount the cylinder head assembly in the block by aligning the dowel pin with the dowel pin hole. G1089 CAUTION : Be careful not to damage the cylinder head gasket. If the dowel pin is not in alignment, lift the cylinder head again and then remount it. CAUTION : After tightening the cylinder head bolts, even at disassembling, the cylinder head gasket should be changed a new one. z Coat the cylinder head bolts with Rear side engine oil, and tighten in proper sequence to the specified torque according to bolt tightening order. (refer to the figure).

z However, before tightening bolts, the side parallel degree between cylinder heads should be adjusted. 88 Printed in Jan. 2001 PS-MMA0415-E1A Front side Type 1 Type 2 Specification TY 12.9T M14×1.5×146 TY 10.9T M14×1.5×146 Torque 24.5 kg.m 6 kg.m +180°+150° (Angle torque)