daewoo — Daewoo D1146 D1146TI DE08TIS Diesel Engine Maintenance Manual

D1146/D1146TI/DE08TIS MAINTENANCE MANUAL (1) First stage : Coat the bolts with engine oil. (3) Third stage : Tighten at about 6 kg.m with a wrench. (2) Second stage : Tighten 1 2 threads with hands. (4) Fourth stage : Tighten at rotating angle method 180 ° with a wrench. (5) Fifth stage : Finally, tighten at rotating angle method 150 ° with a torque wrench . However, all bolts are tightened simultaneously by above steps. z Coat the push rod with engine oil and insert it into the push rod hole. 3.3.28.

Rocker arm assembly z Apply lubricating oil to the rocker arm bush and shaft, and assemble the intermediate bracket with the rocker arm (rocker arm assembly) on the cylinder block using fixing bolts. In tightening the bolts, it must be done at G1088 the specified value using zigzag method. z Semi-install valve clearance adjusting bolts onto the rocker arm. z Install the spring, rocker arm, bracket, rocker arm, spring, washer, and snap ring in the described sequence. z Install the rocker arm and bracket in the same direction. z Adjust the valve clearance as G1056 following guide. 89 Printed in Jan. 2001 PS-MMA0415-E1A Torque M10x1.5 4.4 kg.m M12x1.5 8.0 kg.m