daewoo — Daewoo D1146 D1146TI DE08TIS Diesel Engine Maintenance Manual

D1146/D1146TI/DE08TIS MAINTENANCE MANUAL ‹ By turning the crankshaft, when the intake and exhaust of #6 cylinder (the fifth cylinder from the flywheel) overlap, that is, when #1 cylinder’s piston come at the compression top dead center (OT), adjust the valve clearances by . mark indicated. ‹ After having turned the crankshaft by 360 ° and Intake & exhaust valves of #1 cylinder overlap, that is, when #6 cylinder is in the state of compression TDC (OT), the clearance indicated by mark is adjusted. Flywheel Intake Valve Exhaust Valve Cylinder No.

Cooling Fan G1048 ‹ To adjust the clearance, loosen the lock nuts of rocker arm adjusting screws and push the feeler gauge of specified value between a rocker arm and a valve stem (to measure the clearance of the valve and rocker arm contacting part) and adjust the clearance with adjusting screw respectively and then tighten with the lock nut. 90 Printed in Jan. 2001 PS-MMA0415-E1A