Kubota — SERVICING

05-E2B, 05-E2BG, WSM DIESEL ENGINE Piston Ring Gap (Continued) W1043413 Clearance between Piston ring and Piston Ring Groove 1. Clean the rings and the ring grooves, and install each ring in its groove. 2. Measure the clearance between the ring and the groove with a feeler gauge or depth gauge. 3. If the clearance exceeds the allowable limit, replace the piston ring. 4. If the clearance still exceeds the allowable limit with new ring, replace the piston. (A) Top Ring (Key Stone Type) (B) 2nd, Oil Ring W10312390 S-57 KiSC issued 06, 2011 A Piston ring gap [D905-E2BG] [D1005-E2BG] [V1305-E2BG] Top ring Factory spec. 0.25 to 0.40 mm 0.0098 to 0.0157 in. Allowable limit 1.25 mm 0.0492 in.

Second ring Factory spec. 0.25 to 0.40 mm 0.0098 to 0.0157 in. Allowable limit 1.25 mm 0.0492 in. Oil ring Factory spec. 0.25 to 0.40 mm 0.0098 to 0.0157 in. Allowable limit 1.25 mm 0.0492 in. Piston ring gap [D1105-E2BG] [V1505-E2BG] Top ring Factory spec. 0.30 to 0.45 mm 0.0118 to 0.0177 in. Allowable limit 1.25 mm 0.0492 in. Second ring Factory spec. 0.30 to 0.45 mm 0.0118 to 0.0177 in. Allowable limit 1.25 mm 0.0492 in. Oil ring Factory spec. 0.25 to 0.40 mm 0.0098 to 0.0157 in. Allowable limit 1.25 mm 0.0492 in. Clearance between piston ring and piston ring groove Second ring Factory spec. 0.085 to 0.112 mm 0.0033 to 0.0044 in. Allowable limit 0.20 mm 0.0079 in. Oil ring Factory spec.

0.020 to 0.055 mm 0.0008 to 0.0021 in. Allowable limit 0.15 mm 0.0059 in. Factory specification : a More than 0.2 mm 0.0079 in.