05-E2B, 05-E2BG, WSM DIESEL ENGINE Replacing Crankshaft Sleeve 1. Remove the used crankshaft sleeve. 2. Set the sleeve guide (2) to the crankshaft. 3. Heat a new sleeve to a temperature between 150 and 200 °C (302 and 392 °F), and fix the sleeve to the crankshaft as shown in figure. 4. Press fit the sleeve using the auxiliary socket for pushing (3). NOTE Q Mount the sleeve with its largely chamfered surface facing outward. Should heating is not enough, a sleeve might stop halfway, so careful. (1) Crankshaft Sleeve (2) Sleeve Guide (3) Auxiliary Socket for Pushing (4) Crankshaft W1045923 S-62 KiSC issued 06, 2011 A