Kubota — MECHANISM

05-E2B, 05-E2BG, WSM DIESEL ENGINE (Overloaded Operation) The amount of the movement of the fork lever assembly is limited with the fuel limitation bolt (10) and can not be moved in the direction of the fuel increase. As overload reduces the centrifugal force of the governor weight, which is pressing the torque pin (8) into the floating lever (7), the floating lever pushes the fork lever 1 (6) in the way to increase the fuel supply with the help of the torque spring tension. The fuel supply increases (b) in relation to the degree of the torque pin motion, thus preventing the engine speed from dropping.

At the time, the maximum torque limiter (1) prevents superfluous fuel supply and suppresses the generation of black smoke. (1) Max Torque Limiter (6) Fork Lever 1 (7) Floating Lever (8) Torque Pin (9) Fork Lever 2 (10) Fuel Limitation Bolt (a) Distance to which torque pin (8) pushes fork lever 1 (6) out (b) Increase of fuel W1013023 Q Two Lever Type Fork Lever (for BG Series) The engine speeds of BG engine are 1500 min -1 (rpm) and 1800 min -1 (rpm) specifications. The fork lever assembly of BG series is composed of fork lever 1 (3), fork lever 2 (4). A slide plate is installed in fork lever 1. The governor spring (5) is hooked to fork lever 2 (4).

The start spring is hooked to a slide plate, and holds the control rack in the direction of full fuel position. Fork lever 2 (4) and fork lever 1 (3) are installed with the fork lever shaft (4). (1) Idle Speed Adjust Bolt (2) Slide Plate (3) Fork Lever 1 (4) Fork Lever 2 (5) Governor Spring (6) Fork Lever Shaft W1013377 M-3 KiSC issued 06, 2011 A