Kubota — Replacing Fuses

81 OTHER ADJUSTMENTS AND REPLACEMENTS CHANGING THE BUCKET FUSES To avoid personal injury: A There are two people required to replace the bucket. One person operates the excavator, and the other one mounts the bucket. The person who mounts the bucket must command-guide the movements of the front end attachments. The operator should move the front end attachments only according to the commands of the person who mounts the bucket. Continuous visibility between both persons is indispensable. If there is no visibility, stop working immediately. A When replacing the bucket, make sure to wear eye protection, a helmet and protective gloves.

A During attaching and detaching, chippings and burns may occur at the bolts or bushings. These may cause severe injuries. A Never use your fingers for the alignment of the components (linkage, bucket, arm). The components may sever your fingers by uncontrolled movements. A Read the manual of the attachment to do a correct operation safely when other attachments are installed instead of Kubota specified bucket. To avoid personal injury: A When changing fuse, stop the engine and turn the key in position "STOP". Keep the lock lever for attachment control in the "LOCK" position. (1) Cover (1) Fuse box B Replacing Fuses 1. Remove the cover of the fuse box. 2.

Replace the burnt out fuse with a fuse having the same capacity.