Kubota — Navigation List of Screens

98 LIST OF SCREENS No. Message Problem or failure (What happened) Machine behavior (Provisional measure) Correction 7 Not equipped with overload warning function This message appears if the overload warning switch is pressed on machines not equipped with overload warning system. - - 8 Out of fuel Fuel is running out. - Add fuel. 9 Fuel sensor error The fuel sensor system is in trouble. The fuel level indicator does not appear on the meter.Press the display selector switch, and the normal display is switched back.The machine's other functions are still operative. Immediately contact your local dealer. 10 Charging system error Charging system is in trouble. The battery is not changing.

The machine works until the battery goes dead. Immediately contact your local dealer. 11 Engine oil pressure error The engine lubricating system oil pressure is too low. Stop the engine. The engine may get burnt out. Immediately stop the engine. Immediately contact your local dealer. 12 Overvoltage This message appears if a jumper cable is connected to a 24V battery or improper device to get the engine started or if the alternator is in trouble. Immediately interrupt the engine if with a 24V battery. When the engine gets restarted and is running with no message appearing, it means there is no problem. If this message still appears, immediately ask for repair.

13 Overheat advance warning Water temperature rising Water temperature is rising somewhat higher than specified. Operate with the load a little lessened. Check the radiator and other components for clog. Immediately clean them up. -