99 LIST OF SCREENS No. Message Problem or failure (What happened) Machine behavior (Provisional measure) Correction 14 Cool-down during overheat idling The engine automatically reduces rpm's avoid an overheat. Leave the engine idling until this warning disappears. Do not stop the engine because the coolant temperature will increase sharply and may boil and gush out. Be sure to cool down the engine without stopping it. Refill the radiator with coolant by its boiled-over amount. Unclog the radiator and other components before use again. Check also the hydraulic system for oil leak and other troubles. If an oil leak is found, immediately contact your local dealer for repair.
15 Water temperature sensor error Water temperature sensor error system is in trouble. The meter does not show water temperature. Press the display selector switch, and the normal display is switched back. The machine's other functions are operative, but an overheat and other problems cannot be detected. Immediately contact your local dealer. 16 Lock lever system error The lock lever system is in trouble. The engine can run, but the machine fails to move. Immediately contact your local dealer. 17 Travel 2-speed system (switching) The 2-speed switching system is in trouble. The machine still runs at low speed without switching to high speed. The machine's other functions are still operative.
Immediately contact your local dealer. 18 AI system error The Auto Idle system is in trouble. The accelerator fails too. The accelerator fails, but the machine's other functions are still operative. Move the machine to a place suited for repair. Immediately contact your local dealer. 19 5V short-circuit The sensor's 5V power supply is short-circuited. The majority of systems fail. * The engine may get started and the machine may move. But do not try any jobs. (Just move the machine to a safe place.) Immediately contact your local dealer.