100 LIST OF SCREENS No. Message Problem or failure (What happened) Machine behavior (Provisional measure) Correction 20 12V short-circuit The sensor's or switch's 12V line is short-circuited. The majority of systems fail. * The engine may start and the machine may move. But do not try any jobs. (Just move the machine to a safe place.) Immediately contact your local dealer. 21 CAN system error The communication (CAN) system is in trouble. Some meter readings may be erroneous or some switches may malfunction. The engine may get started and the machine may move. But do not try any jobs. (Just move the machine to a safe place.) Immediately contact your local dealer.
22 General switching system error The general switching system is in trouble. (This message appears only when the general switching function is preset effective.) The engine can get restarted and the machine can move, but the general switching system fails. When the other systems than the general switching system function, the job can be continued. Immediately contact your local dealer. 23 AUX1 port system error The AUX1 port system is in trouble. The engine can get restarted and the machine can move, but the AUX1 port system fails. When the other systems than the AUX1 port system function, the job can be continued. Immediately contact your local dealer.
24 Periodic check (advance notice) This message appears 10 hours before the periodic check interval. Press the information switch, and the list of related components can be reviewed. Get the engine started as usual. Ask your local dealer for relevant part and replace the existing part with it. After replacement, turn on and off the key 10 times, and this message disappears. 25 Periodic check (warning) The periodic check interval has passed. Press the information switch, and the list of related components can be reviewed. The engine can still get started, but immediately ask your local dealer for replacement. Ask your local dealer for relevant part and replace the existing part with it.
After replacement, turn on and off the key 10 times, and this message disappears.