CHECKS BEFORE START 18 B Auto Idle Switch The switch is used to enable and disable the Auto Idle control. B Travel Speed Switch Travel speed will increase when this switch is pushed down. Switching the dual travel speed: 1. Press the travel speed switch. The buzzer beeps twice and the travel speed changes from low to high. The symbol lights up. 2. Press the travel speed switch again, and the buzzer beeps once and the travel speed changes from high speed to low. The symbol goes out. A Enable: Press the Auto Idle switch. When the Auto Idle control is on, the Auto Idle lamp stays on. A Disable: Press the Auto Idle switch once again.
Now the Auto Idle control is deactivated (The Auto Idle lamp goes out.) (1) Auto idle switch (2) Auto idle lamp B Throttle Potentiometer 1. Sit down on the operator's seat and turn the throttle potentiometer clockwise (toward the high speed), and the engine revs up. 2. To stop the engine, turn the throttle potentiometer fully toward the low speed and keep the engine at the idling speed. Then set the starter key to the "STOP" position. (1) Travel speed switch (2) Speed indicator light A When activating the travel speed switch, it must be pushed down completely. A Each time the travel speed switch is pressed, the travel speed is switched between low and high. (1) Throttle potentiometer