EXCAVATOR OPERATION 38 C Checking the settings of each action mode When an action mode is selected and the " " mark appears at the lower right of the icon, the flow volume setting gets displayed by pressing the switch 4. B AUX Port Handling Procedure 1. Turn the starter key to the "RUN" position. Let the engine warm up after start-up for approx. 10 minutes under no load conditions. (1) Icon (2) Information mark (3) Information switch (Switch 4) (1) Starter switch (A) "STOP" (B) "RUN" (C) "START" [Display in AUX 1 and 2 modes] 2. Lower the pilot control lock lever (UNLOCK). (1) AUX Port 1 (2) AUX Port 2 (3) AUX Port 3 (4) AUX Port 4 (1) Pilot control lever (A) "Unlock" (B) "Locked"