39 EXCAVATOR OPERATION 3. Push the AUX port enable switch (switch 3). 4. If the machine is equipped with the AUX 1 port, move the AUX port knob of the right attachment control lever to the right to send oil to the AUX port 1. Move the AUX port knob of the right attachment control lever to the left to send oil to the AUX port 2. If the machine is equipped with the AUX 2 port, move the AUX port knob of the left attachment control lever to the right to send oil to the AUX port 3. Move the AUX port knob of the left attachment control lever to the left to send oil to the AUX port 4.
(1) AUX port enable switch (Switch 3) A If the pilot control lock lever is at the "LOCKED" position, the following message appears onscreen. Down this lever to the "UNLOCKED" position and then press the AUX port enable switch (switch 3). (1) Attachment control lever (left) (2) Attachment control lever (right) (A) "AUX port 1" (B) "AUX port 2" (C) "AUX port 3" (D) "AUX port 4" A Proportional control of the AUX port knob allows for slow-to-fast movement of attachment. Example; If you move the AUX port knob halfway, the attachment will move at approximately one-half speed.