Kubota — Checking Engine Oil Level

MAINTENANCE 58 A Do not fill the recovery tank over the "FULL" marking. A Do not fill with dirty or salty water. 2. If necessary, open the cap and fill in fuel. B Checking Fuel Level To avoid personal injury: A Stop the engine and remove the key before fuelling. A Do not smoke while fuelling. A By temperatures over -5 , use No.2-D diesel fuel, when temperatures are under -5 , use No.1-D diesel fuel. A Make sure that the fuel tank is not run empty. Air will enter the fuel system, and must be purged before restarting.

A See "PURGING OF THE FUEL SYSTEM" in "OTHER ADJUSTMENTS AND REPLACEMENTS" A To prevent condensation (water) accumulations in the fuel tank, fill the fuel into the tank before parking overnight. (1) Fuel tank cap (2) Fuel level audible indication switch B Checking Engine Oil Level 1. Check the fuel level by the fuel level indicator. To avoid personal injury: A Stop the engine and remove the key before checking the oil level. A Use engine oil with the correct viscosity. (according to the outside temperature) A After stopping the engine and remove the key, wait five minutes, then check oil level.

(Excavator must be on level ground.) Insert the engine oil dipstick fully into the prepared opening, remove again and check the oil level; if necessary fill with oil. The machine must be on level ground when checking the oil level. (1) Fuel gauge (A) "EMPTY" (B) "FULL" (1) Engine oil dipstick (2) Oil filling port (A) Required oil level range Fuel tank capacity 68 L