Kubota — Checking V-Belt

59 MAINTENANCE B Checking Hydraulic Oil Level 2. Check the oil level as to whether it lies on the center of the gauge at normal temperature (10 to 30 ). 3. Enough oil is present when oil is at center mark. 4. Should the oil level be too low, loosen the oil filling plug gradually to release pressure in the tank, then fill up with oil at oil fill port. To avoid personal injury: A Stop the engine and remove the key before checking the oil level. A Before filling oil, wipe away all sand and dust from around the oil port. Make sure to use an identical type of hydraulic fluid. A The excavator has been filled with hydraulic fluid before delivery. See "RECOMMENDED OILS".

(Do not mix different oils.) 1. Park the excavator on a firm, flat and level surface. Lower the attachments and dozer blade to the ground and stop the engine. (1) Gauge (1) Gauge (2) Oil filling plug B Checking V-belt To avoid personal injury: A Stop the engine and remove the key before checking the V-belt. A Check the V-belt for cracks and proper tension. (See "Adjusting V-belt Tension" in "REGULAR CHECKS AND MAINTENANCE WORK" section.)