61 MAINTENANCE A Radiator and oil cooler fins and ribs must be clean in order to avoid overheating the engine and to allow free flow of air through the cooling elements. A Pressure of compressed air must be under 205 kPa (2.1 kgf.cm , 30 psi) B Checking and Cleaning Engine and Electrical Wiring To avoid personal injury: A Always stop the engine and remove the key before cleaning the wiring, cables and engine. B Checking Washer Liquid If the windows washer is switched on with the washer liquid tank empty, the motor may be damaged. Always keep the tank filled. Before starting, check whether flammable substances have gathered on the battery, the cables and wiring, the muffler or on the engine.
Remove thoroughly. Check the electrical circuitry for disconnections, shorts or loose terminals. B Greasing Boom Swing Fulcrum Grease the marked grease nipples shown by arrows in the illustration below. (1) Washer liquid tank B Cleaning Pre-Cleaner To clean the pre-cleaner, remove the wing nut and remove the pre-cleaner bowl. B Washing Whole Machine A Do not wash the excavator with the engine running. Water could enter the air filter and damage the engine. Make sure that the air filter is kept dry. A Remove the mud before washing the machine. (1) Wing nut (2) Pre-cleaner bowl (A) "DUST LEVEL"