Kubota — Greasing Bucket Pin and Bucket Link Pin

MAINTENANCE 62 B Greasing Front Attachments (without Bucket Pin and Boom Swing Fulcrum) To avoid personal injury: A First lower all attachments on the ground then stop the engine and remove the key. A While greasing, take care not to step on the bucket teeth. A When doing excavation work in water, generously grease the following points. After ending work, grease again. Grease the marked grease nipples shown by arrows in the illustration below. (1) Dozer cylinder boss (2) Dozer linkage pin B Greasing Bucket Pin and Bucket Link Pin To avoid personal injury: A First lower all attachments on the ground then stop the engine and remove the key.

A While greasing, take care not to step on the bucket teeth. A When doing excavation work in water, generously grease the following points. After ending work, grease again. Grease the marked grease nipples shown by arrows in the illustration below. (1) Boom bottom linkage (2) Arm bottom linkage (3) Boom cylinder boss (4) Arm cylinder boss (5) Bucket cylinder boss (1) Bucket link pin (2) Fixing pin between arm and bucket (1) Swing cylinder boss