Kubota — Hydraulic Oil Change (Including Replacing of the Suction Filter in the Hydraulic Tank)

73 REGULAR CHECKS AND MAINTENANCE WORK A Always check the oil level when replacing the filter element. B Hydraulic Oil Change (Including Replacing of the Suction Filter in the Hydraulic Tank) To avoid personal injury: A Wait long enough for the hydraulic fluid to cool down. Then begin with the change of the hydraulic fluid. 1. Park the excavator on a firm, flat and level surface. Lower the attachments and dozer blade to the ground and stop the engine. (1) Head cover (2) Element (3) O-ring (4) Case B Replacing Hydraulic Return Filter Element To avoid personal injury: A Remove the oil filter element only after the oil in the hydraulic tank has cooled down. 1.

Hold the filter support top and take the filter out of the tank. 2. Loosen the set bolt first and then detach the return filter from its support. Replace the filter with new one. 3. Remove the bolt from the cover. Take out and replace the breather filter with new one. 2. Remove the drain plug on the underside of the hydraulic tank and drain the oil. (1) Breather filter (2) Bolt (3) Cover (4) Set bolt (5) Return filter (6) Filter support (7) Suction filter (1) Drain plug 3. Remove the suction filter lock pin and detach the suction filter. Replace the filter with new one.