. OPERATION OPERATION CHECK OIL LEVEL IN HYDRAULIC TANK, ADD OIL WARNING NOTICE diagram on the right, start the engine, run at low idling, then lower the work equipment and attachment. 3 - 74 Immediately af ter the engin e is stopped, the parts and th e oil are at a high temperature. Wai t for the temperature to go down before starting the operatio When the cap of the oil fille r por t is removed, oil may sp urt out, s o turn the cap slowly to re lease the internal pre ssure, then remove it caref Do not fill abov e the H line. This will damage the hydrauli c circuit and may cause oil to spur 1.
When check ing the hydrauli c oil lev el or adding oil, set the work equipment i agram right before starti 2. If the work equipment 3. Open the hy draulic tan k inspection cover a t the re ar left o f the machine an d check the position of s ight gauge (G) on the t ank. 4. Check the o il level with sigh t gauge (G). Th e oil lev el shoul d be between the H and L m arks .