Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION OPERATION OPERATION REMARK The oil level changes according to the oil temperature. Use the following as a guideline. Before starting operations: Between H and L marks (oil temperature 10 ° C - 30 ° C (50 ° F - 86 ° F)) During normal operations: Near H (oil temperature of 50 ° C - 80 ° C (122 ° F - 176 ° F)) 6. After adding oil, be sure to screw on the oil filler cap and lock CHECK ELECTRIC WIRING CAUTION 3 - 75 5. If th e oil level is below the L mark, add top of 6. Aft ith the If the fuse blows frequently or there are tra ces of short circuits on the electric wir ing, investigate the cause immediatel y and ask y our Komatsu distributor to carry out r epairs.

Keep the top surface of the battery clean an d inspect the breather holes in the batte ry caps. If t hey are c logged wit h mud o r dirt, rinse the battery cap to remove the materia l clogging it. Check that the fuse is not damaged and that a fuse of the specified capacit y is bein g used. Check als o for tr aces of disco nnections or short circuits in the el ectric wiring, and for loose bolts. If any loose bolts ar e found, ti ghten t hem. Be part icularly careful when inspecting th Always check materia Please consul t your Komatsu distributor when carrying out investigation an d repair o f the ca battery. Remove