. OPERATION OPERATION STARTING IN COLD WEATHER WARNING low idling 3. Turn the key in starting switch (2) to the ON position. cold 3 - 86 Do not attempt to start the e ngine by short-circuiting the engine sta circuit. Such an act may ca use a serious bodily injury or fire. Check that there are no per sons or obstacles in the surrounding then sound the horn and st Never use starting aid fluid art the engine. s as they may cause explosions. Exhaust gas is toxic. When starting the engine in confined space particularly careful to ensur e good ventilation. NOTICE If snow or melted water gets into the fan or alternator belt, there is danger that it will freeze and ca use breakage.
Before s tarting the engine, check carefully around the engine and fan. Do not crank the starting m otor continuously for more than 60 sec onds for any reason. If the en gine does not start, wai t for at least 2 minutes, then repeat the procedure from Step 3. the fuel control dial is at the low idling (MIN) position. Before starting, check that the fuel control dial is at the low idling This machine is equipped w ith an automatic warming-up function and turbo protect function. In cold weather, even if t he fuel control dial is operated imm ediately after the engine is started, th ere may be no change in the e If the fuel control dial is components.
Set the fuel control dial to a midpoint position or low speed positi Set the fan rotation select operation if the weather is c 1. Before starting, check idling position. 2. Set fuel control dial (1) that fuel control dial (1) is at the to a point midway between low i speed position (MAX). position (MIN) and full REMARK This machine is equipped with an automatic preheating funct When the key is set to th e ON position when starting in rt automatically. weather, preheating will sta