. MAINTENANCE SERVICE PROCEDURE REPLACING ELEMENT 2. Remove 3 clips (1), then remove dust cup (2). CAUTION 4 - 24 1. Open engine side cover on th 3. Remove outer element (4). Do no t remove inner element (3) at this time, however. NOTICE When cleaning the dust cup, do not r emove evacuator valve (7). 4. Clean the inside of the air cle aner body and dust c up 5. Remove inner element (3), th en install a new inner element 6. Set new outer element (4) an d install dust cup (2), then secure them with clips (1 When installing the dust cup, chec k O-ring (6). If the O-rin g has any defect, replace it.
When installing the dust cup, hold the case down securely and chec k that all three clips (1) a re fitted correctly to the b 7. Replace record sheet (7) with 8. Close the engine side cover o n the left side of the machine.