. MAINTENANCE SERVICE PROCEDURE WHEN IT IS IMPOSSIBLE TO CHECK ELECTROLYTE LEVEL FROM SIDE OF BATTERY battery, or there is no display of the UPPER does not reach the sleeve, add distilled water so that the level reaches the bottom of the sleeve (UPPER LEVEL line) without fail. 4 - 52 If it i s impossible to c heck the electrolyte leve LEVEL li ne on the sid e of the battery, check a 1. Ope n the hydraul ic tank inspection cover o n the left side of t he 2. Remove the vinyl cover from the top of the 3. Remove cap (1) a t the top of the battery, loo k through the wate filler port, and che ck the electrolyte surfac e.
If the electrolyt of the Use the diagram belo w for reference, and che ck if the electrolyte reaches the bottom of the 4. After adding distill ed water, tighten cap (1) REMARK If water i s added to ab ove the bottom tip of the sleeve, use a pipette to remove electrolyte. N eutralize the removed electroly te with sodiu m bicarbonate, then flus a rge Komatsu distributor o WHEN IT IS POSSIBLE TO USE INDICATOR TO CHECK ELECTROLYTE LEVEL If it i s possible to use an indicator to check the electrolyte level, f ollow the instructions given