. MAINTENANCE SERVICE PROCEDURE CHECK ALTERNATOR DRIVE BELT TENSION, ADJUST CHECKING 4 - 53 1. Remove front cover (1). 2. Remove cove 3. Press the belt with a finger force of approx. 58.8 N {6 k g} at a point midway betwe crankshaf pulle (3) wate pulley (4) Standard deflection (A): 6 - 7 mm (0.2 - 0.3 in) ADJUSTING 10 mounting bolts from engine side cover (5) on the 1. Remove 10 m ounting bolts r (5) on the