. MAINTENANCE SERVICE PROCEDURE REPLACE FUEL PRE-FILTER CARTRIDGE WARNING side of the 4 - 61 After the engine has been operated, all par ts are at high temperature, so do not replace the filter i mmediately. Wait fo r all parts to cool down bef ore starting the operation High pressure is generated inside the eng ine fuel pipin g system When replacing the filter, wait for at least 30 seconds after stopping the engine to let the inte rnal pressure go dow n before replacing the filt Do not bring any NOTICE Genuine Komats u fuel filter cartridges us e a special fil ter that has highly efficient filtering abi lity. When replacing the filter cartridge, always use a genuine Komatsu part.
The common rai l fuel injection system us ed on this ma chine c onsists of more precise parts th an the conventional injection pump and nozzle . If any part other t han a genuine Komatsu f ilter cartridge is used, dust or dirt may get in and cau se problems with the injection system. Always avoid using substitute pa rts. When carrying o ut inspection or maintena nce of the fue l system , pay more attention than norm al to the entry of dirt. If dirt is stuck to any part , use fuel to wash it off c ompletely. NOTICE Do not move the bla de when the front cover a nd engine sid e cover on the left side of the machine a re open.
The blade w ill hit the covers and there is danger that the covers m ay be broken . Prepare a cont ainer to catch the fuel. Prepare a filter wrench 1. Open the fue machine. 2. Set fuel suppl y valve (1) to the CLO SED positio arrow). (Machine of poor fuel arrangement spec