Komatsu — EVERY 1000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE EVERY 1000 HOURS SERVICE REPLACE FUEL MAIN FILTER CARTRIDGE Carry out this operation after carrying out the maintenance in the "REPLACE FUEL PRE-FILTER CARTRIDGE (PAGE 4-61)" for every 500 hours. WARNING side of the 4 - 65 Maintenance for e very 50, 250 and 500 hours should be carried out at the same time. After the engine h as been operated, all par ts are at high tem perature, so do not replace the filte r immediately. Wait fo r all parts to cool down bef ore starting the operation . ine fuel piping system when the engine is running. High pressure is generated inside the eng ine fuel piping s ystem when the engine is running.

When replacing t he filter, wait for at least 30 seconds afte r stopping the engine to let the int ernal pressure go dow n before replacing the filte r. fire or flame close. Do not bring any NOTICE Genuine Komats u fuel filter cartridges us e a special filter that has highly efficient filtering a bility. When replacing the filter cartridge, always use a genuine Komatsu part. The common rail fuel injection system us ed on this mach ine consists of more precise parts than the conventional injection pump and nozzle . If any part other t han a genuine Komatsu f ilter cartridge is used, dust or dirt may get in and ca use problems with the injection system. Always avoid using substitute pa rts.

When carrying o ut inspection or maintena nce of the fuel s ystem, pay more attention than nor mal to the entry of dirt . If dirt is stuck to any part , use fuel to wash it off co mpletely. NOTICE Do not move the bla de when the front cover a nd engine side cover on the left side of the machine are open. The blade w ill hit the covers and there is danger that the covers m ay be broken. Prepare a cont ainer to catch the fuel. Prepare a filter wrench 1. Open the fue machine. 2. Set fuel suppl y valve (1) to the CLO SED position ( arrow).