. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE REMARK 4 - 66 (Machine of poor fu el arrangement specificati 3. Open engine si de cover on the left side o f machin e. 4. Set the containe r to catch the fuel under t he filter c artridge (2). 5. Using a filter wr ench, turn filter cartridge ( 2) counterclockwise on remove it. NOTICE Do not fill the new f ilter cartridge with fuel. Remove cap (B) an 6. Clean the filter h older, coat the packing su rface of t he new filter cartridge thinly w holder. ith oil, then install the filte r cartridg e to the filter 7.
When installing, tighten until the packing s urface c ontacts the seal surface of the filter holder, then tighten i t 3/4 of a turn. If the filter cartri filter cartridge is dge is tightened too far, th e packin g will b e damaged and this will lea d to leakage of fuel. I f the too loose, fuel will also le ak from the packing , so always tighten the correct amount. 8. Open fuel suppl 9. After replacing f ilter cartridge (2), bleed th e air fro m the fu el circui 10. Fill the fuel tank with fuel (to the position where th e float i s at t he 11. Loosen the kno head and fuel m If the engine runs out of fuel, operate feed pump (3) in the same way to bleed the air. 12.
After completing the air bleeding operation , push in the kno b of feed pump (3) a