Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE pressure of the accumulator has gone down. Please contact your Komatsu 4 - 76 3. Raise the work equipment ( blade) to t he maximum height. NOTICE llowing procedure for lowering the blade to the ground within 15 seconds after stopping the engine. Carry out the fo llowing procedure f or lowering the blade to th e groun d within 15 second When the engin e is stopped, the pre ssure inside the accumula tor gradually goes down, s o this inspection can be carried out only immediately aft er the engine is sto pped. 4.

Leave the work equipment r aised to th e maximum height, t urn the startin g switch to the O FF position and stop th e engine 5. Turn the k 6. Turn the w ey in the starting ork equipment lo switch to t ck lever to he ON FREE positi positi 7. Operate th e blade control le ver fully in t he direction t o lower the blade. REMARK Check that th e area around the machine i s safe, then operate the blade control l ever to the LOW ER position . 8. Check tha t the work equipm ent goes d own to the gr ound under its own we ight. letes the inspection. 9.

This comp letes the inspecti NOTICE If operations ar e continued when th e function o f the accumul ator has dropped, it becom es impossible to release the re maining pressure in the hydraulic circuit wh en there is a failure in the machine . I distributor. Work equi pment does not g Stops whil