Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHECK ACCUMULATOR (FOR CONTROL CIRCUIT) WARNING METHOD OF CHECKING ACCUMULATOR FUNCTION 4 - 75 The a ccumulator is charged wi th high-pressure nitrogen ga s, so mistaken operation may caus e an explosion, which will le ad to seriou s injury or damage. Whe n handling the accumulator, always d o as f ollows. Th e pressure in the hydrauli c circuit cannot be complete ly removed. W hen removing the h ydraulic equipment, do not stand in t the he direction that the oil s purts out when carrying out t he operation. In addition, loosen t he bolts slowly when c arryin g out operation. umulator. dispose of it in fire. eld it. t it to any impact.

Do not disassemble the acc Do not bring it near flame or Do not make holes in it or w Do not hit it, roll it, or subjec Wh en disposing of the accu mulator, the gas must be re leased. Please contact your Kom atsu distributor to have this work car ried out. ACCUMULATOR FUNCTIO N pressure in the control circuit. Even the control circuit can be actuated for Accumulator (1) stores the after the engine is stopped, Even d for a sho rt time, so the followin g actions are possible. If t he control lever is ope rated in the direction to lo wer the work eq w uipment, the work eq eight. uipment can go down under its own aulic circuit can be released.

Th e pressure in the hydr aulic circuit can be releas The a ccumulator is installe d to the position shown in the diagram on th e right. Repl ace the accumulator ev ery 2 years or every 400 0 hours, whichever comes soo Chec k the accumulator as f ollows. m, level ground. 1. S 2. O top the machine on fir perate the parking bra ke lever to LOCK positio