. OPERATION EXPLANATION OF COMPONENTS METHOD OF USING OIL AND FILTER MAINTENANCE MODE (3) The quantity of replacements until now is displayed. by When changing the oil or replacing the filter, select the appropriate item, then depress the U position of the buzzer cancel switch. A question asking if the replacement history is to be updated is displayed. Select YES with the information switch ( ), and press the U p osition on the buzzer cancel switch. The number of times of replacement increases by 1, the replacement interval is also reset, and the oil and filter replacement interval lamp goes out.
If the maintenance caution lamp does not go out when this is done, it means that the replacement interval is close for some other item, so check. REMARK To return to the maintenance item without resetting, use the information switch ( ) to select NO, then press the U portion of the buzzer cancel switch. 3 - 29 NOTICE Thi s function i s only a guideline . If di rty oil or filters are found during daily maintenance, replace t hem immediately If th e controller s or monitor pane l are replaced, the timer for this function will not w ork properly.
Contact your K omatsu distributor for replacemen In t he o il and filter maintenance for oil and f ilter (multi-information) (1) (2) The The item i time r s displaye emaining u e replacemen t intervals panel B Th e display items c an be displayed in orde information s witch to the left or ri ght ( ). operating the Code Display item Replacement interval 01 ENG OIL Engine oil 500h 02 ENG FILT Engine oil filter 500h 03 FUEL FILT Fuel filter 1000h 41 P FUEL FILT Fuel pre-filter 500h 04 HYD FILT Hydraulic oil filter 2000h 08 FNL OIL Final drive oil 1000h 10 HYD OIL Hydraulic oil 2000h 21 HST FILT HST charge filter 2000h