. OPERATION EXPLANATION OF COMPONENTS switch to switch to the screen for adjusting the brightness. t square moves closer to L 3 - 30 METHOD OF USING USER ADJUST MODE With the user adjust mode, the brightness of the panel scree n backlighting and the contrast of the liquid crystal pane can be c 1. Adjusting backli ghting of liquid crystal 1) The figure o n the right shows the backlighting of the liquid-crystal g On this scre en, press the U posit ion of the buzzer cance 2) Operate the information switch to adjust the brightness. When the t square moves clo screen becomes br screen becomes da > position:
3) Press the U position of the bu brightness of the zzer cancel switch to l confirm the backlighting of the iquid-crysta l gauge portion. The s creen then return s to the previous scr een. REMARK The he on Entering this mode when the front lamps a re lit makes it possible to adjust the brightness w hen the front lamp s are lit. In the same way, entering this mode w hen the front lamps are not lit make s it possible to adjus t the brightness whe n th e front lamp s are not lit.